AINAVI 10 Inch Under Seat Car Subwoofer Bass Active Stereo with Multi Colors Ambient Lighting,Built-in Amplifier 800 Watts Max, Remote Control and Enclosure
AINAVI 10 Inch Under Seat Car Subwoofer Bass Active Stereo with Multi Colors Ambient Lighting,Built-in Amplifier 800 Watts Max, Remote Control and Enclosure
Description
- AINAVI CX-80 thin type 10″ Active Car Subwoofer in sealed aluminum enclosure. Fashion multi-colors ambient lighting, controlled via smartphone app or remote controller.
- Built-in Amplifier. 800 Watts peak power output, 220 Watts RMS. With high-speed MOSFET power supply, improved switching speeds, and lower thermal impedance for higher switching frequencies.
- Amp Features: (1) Variable Low-Pass Filter, frequency 50Hz-250Hz; (2) Low-Level Inputs (RCA)- High-Level Inputs, for options; (3) Variable Bass Boost & GAIN Input, adjust the low bass within the boost range to just the way you like it.
- Dimensions: 343 mm*260 mm* 82mm / 13.5” x 10.2”x3.2″; Unit Weight: 8 Lbs. The combination of amplifier and subwoofer makes it easy to install under the passenger’s seat.
- The Complete Wiring Kit and high-to-low-level inputs adapter in the package make the installation easier. For safety, we strongly encourage the professional installation of this active car subwoofer.
- We provide a one-year product warranty and professional technical support. Please do not hesitate to contact us; we will reply as soon as possible!
FAQ
- To use wired CarPlay, please use the original data cable and connect it to the 4pin USB cable.
- To use wireless CarPlay, please turn on WiFi and Bluetooth of your iPhone and connect your phone's Bluetooth to the head unit's Bluetooth. Please note that you only need to connect Bluetooth but not WiFi.
- Please make sure that your phone supports Google services and Android Auto. lease note that some mobile phones don't support Android Auto,and some mobile phones only support wired Android Auto but not wireless Android Auto.
- lf your phone supports Android Auto, please install Android Auto APP from the Play store before using it.
- To use wireless Android Auto, please turn on WiFi and Bluetooth of your phone and connect your phone's Bluetooth to the head unit's Bluetooth. Please note that you only need to connect Bluetooth but not WiFi.
- Please use a thin needle to poke the button in the small hole next to the RST of the car stereo, then the device will restart.
- Please check if the car stereo fuse is burnt out.
- After starting the car, please use a multimeter to measure whether there is 12V voltage on the red and yellow wires in the power cable.
1. Please reconnect the cable speaker output wires in the power cable with the interface of the original car speaker.
2. Please make sure that the amplifier control wire (REM) of the original car is properly connected to the amplifier control wire of the car stereo.
3. Please connect the AMP to the AMP-POW in the RCA.
